JUTAI vehicle Loop Detector Applications

With years of technology precipitation and accumulation, the vehicle detectors produced by JUTAI have won some international and European brands and domestic low-end products with excellent quality, good cost performance, and excellent after-sales service. With the recognition of more and more foreign customers and friends, we have gradually opened up the popularity in foreign countries, and the LOOP Detector has gradually formed a complete series. At the same time, we are committed to helping some Wholesaler and Dealer Provides OEM Service based on the concept of development and growing up together. JUTAI vehicle Loop Detector Applications

JUTAI vehicle Loop Detector Applications model please refer to the following info

These models can freely choose according to the needs of the project. We have an excellent design department to help customers OEM the brand and assist our customers to do the corresponding promotion activities in the local area to achieve a win-win situation. So what are the unique advantages of the vehicle detectors produced by JUTAI compared to the similar detector on the market? Let me list them to our distinguished guests one by one.

Vehicle Type Detected

JUTAI vehicle detectors can detect almost all kinds of vehicles on the market, such as motorcycles, cars, big trucks, heavy container trucks, super long vehicle, forklifts, etc. so that our customers can be very flexible to use our loop detector. A vehicle detector has strong adaptability and solves the problem of many different car types at one entrance and exits.

vehicle detection installation

Inductive Value

The reason why we can detect the above models is that our vehicle detectors have a very wide sensing range. We have achieved an ultra-wide sensing range from 15μH to 2000μH, and most of the similar products on the market have a sensing range of only 150μH-300μH. The scope is only suitable for detecting small cars. When detecting heavy vehicles, the range of sensitivity changes. If the detection value exceeds 300μH, there will be a wrong function of the gate or door, the vehicle may be dangerous, and with the very narrow car type detection, many entrances and exits often have multiple types of vehicles, so the big problem is that the application is very inflexible. but JUTAI Vehicle loop detector can solve these problems.

loop detector inductive value

Flexible Loop Coil Installation

Since JUTAI vehicle detectors have this irreplaceable advantage, the ultra-wide detection range is 15μH-2000μH, so we are very flexible when we re-construct, our coil specifications can be large or small, as long as we are in our inspection. Between the detection range, we can usually plan the size of our coil according to the width of the road. In addition, if there are more vehicle models to be taken into consideration at the entrance and exit, we usually ask our guests to increase the turns of coils appropriately. The problem of the model; the 150-300μH loop detector on the market usually requires very strict standards. It usually requires a length of 1 meter and a width of 2 meters. Therefore, many small intersections and narrow roads have no way to be applied. In addition, there is no way to solve the problem of multiple car model detection.

flexible loop coil installation

Sensitivity And Frequency

JUTAI Loop Detector has 16 levels of sensitivity, and the customer can flexibly set the sensitivity according to the specific case. At the same time, our vehicle detector has 4 different application frequencies. For some cases with very close entrances and exits, we set different frequencies by flexible setting dialing, which effectively solves the problem that the coil distance is too short and causes the same frequency Interference problem.

loop detector sensitivity

Power Supply

All series of vehicle detectors produced by JUTAI adopt the wide voltage output mode, 110-240 VAC, 12-24 VAC/DC, so that customers can purchase One model but suit two voltages, which effectively reduces customers' inventory and Funding pressure, this feature is also an important feature that our customers like very much.

vehicle detector power

Temperature Testing

Vehicle detectors, we have to carry out rigorous quality testing for each particle, our adaptation temperature is from -40 degrees to 80 degrees, so that our vehicle detectors are in cold regions and extremely hot the Middle East, Regions such as India are highly adaptable in temperature.

loop detector temperature testing

PH Testing

Our vehicle detectors, we have a strict PH test on the selection of the device, our detector base, salt spray corrosion test can reach 15 days, and we test some domestic brands of the same class, about 3 days The device has been completely etched away.

Anti-Lighting Test

For some high-light-emitting areas around the world, such as countries like Malaysia, our vehicle detectors can withstand 100,000 volts of lightning strikes.

loop detetcor lighting test

Fault Detection Function

JUTAI vehicle detector has fault detection output, when the loop detector detects coil fault or other fault factors (except relay fault), B relay can output a signal, the warning light connected to B relay will flash or alarm reminder Dimensional or replacement, after another few minutes or so, the B relay will automatically reset, loop detector can continue to be used, the customer can reasonably arrange the time for replacement or maintenance work, most of the other similar products on the market, if there is a fault, the loop detector will stop working, and the customer should go to the case to carry out the maintenance work immediately, which will bring more complaints to the end user, and the installer will also increase the high after-sales maintenance cost and bad reputation.

Relay Delay Output Function

JUTAI Vehicle loop detector has a 2s delay output. This function has been applied with our UHF long range reader at a very short entrance. When the car is near to the gate, it needs to be delayed 2 seconds, and start to read tag by the reader, and then output the signal to open the gate. This successfully solves the problem that the entrance distance to the gate is very narrow and requires a delay time. Most similar brands on the market are not designed with this humanized function.

loop detector delay output

Street Parking Application

JUTAI vehicle detector has a mode that allows the vehicle to stop indefinitely. When the car is on the coil, the relay always outputs a signal until the car leaves. This function is used by some of our customers in the street parking lot project. Determine the parking time for charging money.

detector street parking application

JUTAI vehicle Loop Detector Applications

Due to these very user-friendly advantages, our vehicle detectors are widely used in gate control systems, parking access control systems, rolling gate control systems, highway toll collection systems, traffic control systems, and working with JUTAI Controllers and traffic lights for use in some special corner warning systems.

loop detector application