Infrared Beam Sensor 1-20M Detecting Range

What is a infrared photocell sensor? Photoelectric safety sensors for personnel safety.Together with the appropriatesafety control units, active photoelectric protective devices such as safety thru-beam sensors and safety light grids ensure that a stop is applied on detection of unauthorized access or if someone reaches into a danger zone.JUTAI IR-20M infrared beam sensor with 20m distance for sliding gate.
 

IR-20M infrared photocell sensor with 1-20m distance for sliding gate has been widely used in the sliding door access control system. Infrared photo beam is usually installed on both sides of the sliding door. One side is the transmitting end and the other side is the receiving end. When the infrared beam detects the person or the car passes by, giving a signal to the sliding door control gate system, the sliding door control system is better than the signal given by the infrared radiation, it will keep the door in a door open state, to ensure the safety of people or cars.It's best to place the infrared beam sensor as close to the gate as possible to reduce the chance of this happening.

JUTAI's infrared beam sensor installation is very simple, it is compatible with 12VAC / DC and 24VAC / DC voltage, no matter what voltage your door machine is, a product can be easily handled, reducing inventory pressure. In addition, Haotai's infrared radiation support one-on-one working state and one-to-many working state. If the case is one-to-one, we provide a jumper cap. Just insert the jumper cap according to our operating instructions. The location, and the operating current in AC mode, makes it easy to implement the functional mode you want.

Technology Parameter:

Features:

1. infrared beam sensor/single beam detector is used for automatic slide door,shutter door,garage door windows etc.

2. Consists of a transmitter and a receiver,and the integrated can produce infrared beam.Narrow infrared beam(I or II) can avoid interruption by external light.

3. Even installed at low height (20-40cm from the floor),the detecting distance can also be guaranteed(2-20meters).

4. The IR-20 Infrared Beam Sensor 1-20M Detecting Range provides a self-detecting function for the sliding doors.Once the self-detecting beam is interrupted,the door will stop closing and reverse rapidly to the utmost width.The door will open until the detecting beam is resumed.When the door completely closes,the detecting beam becomes invalid.

Infrared Beam Sensor Application areas:

Boom barrier gate safety application
sliding gate
Gate opener system
Security Alarms and Warnings system
Home Security
gate operator safety accessories

More infrared beam sensor/ /infrared gate sensors / photoelectric switch sensor/ photoelectric light sensor products, pls contact: