915Mhz UHF Passive Long Range RFID Card Reader Automatic Barrier

915Mhz UHF Passive Long Range RFID Card Reader Automatic Barrier System

915Mhz UHF Passive Long Range RFID Card Reader Automatic Barrier is an ultra-high-frequency long range Wiegand reader read up to 7 meters (free air reading) depends on the interference on site and proper card reading angle. It is an Ideals for access control tracking system, car parking reader system. JUTAI UHF long range reader is complete with mounting bracket and power supply, housing made of PET material which is weatherproof against sunshine and rain.

JUTAI integrated UHF long range RFID reader use UHF band RFID technology with operating frequency 860-868Mhz or 902-928Mhz, which can be adjusted based on the different countries frequency regulation. For example, Malaysia use 919-923Mhz, United Arab Emirates and Oman use 865.6-867.6Mhz, India uses 865-867Mhz, Indonesia uses 923-925Mhz, etc. JUTAI have UHF program software for all these settings: frequency range, interface WG26/34/RS232/RS485,  ground sensor working mode or initiative working mode.

915Mhz UHF Passive Long Range RFID Card Reader Specifications

• Integrated UHF long range reader, using the UHF band RFID technology, which has the following characteristics

• Operating frequency 902 ~ 928MHz, adjusted according to different countries and regions

• Directional antenna technology recognizes only the front of the card reader

• Power is less than 0.5W, in line with international environmental standards

• Used in a metal chassis, or used independently

• Reading distance 8-10 meters (depending on the antenna

• Support eligible ISO1800-6B, ISO1800-6C (EPC G2) protocol passive RFID cards

• Using standard Wigand 26/34 output interface for direct access to Wigand Interface System

• Working mode： ground sensor mode or continuous mode

• Reserve RS232 \ RS485 interface, which can be connected to a PC

• Work with JUTAI passive UHF card, sticker, dual frequency card( uhf+125khz, uhf+13.56mhz)

7-9M UHF long range Reader for Parking Management system Specification

• Transportation management

• Vehicle management Guest Registration System

• Road and bridge toll

• Custom management

• Warehouse management

• Car parking management

• Production management

• Access control management

Wiring Diagram

Commissioning

1. Readers should not face to each other to avoid reading conflicts.

2. The distance between two readers is at least 2.5m

3. U-shaped mounting bracket can be used to adjust the angle of the reader in order to achieve the best reading distance.

915Mhz UHF Passive Long Range RFID Card Reader Installation And Commissioning

The entrance and exit readers were installed at both ends of the corner of the booth to prevent signal interference

• UHF long-range readers should not face to each other to avoid reading conflicts.

• The distance between two readers is at least 2.5m.

• U-shaped mounting bracket can be used to adjust the angle of the reader in order to achieve the best reading distance.