IR-20M Infrared Photocell Sensors With 20m Distance For Sliding Gate

IR-20M Infrared Photocell Sensors With 20m Distance For Sliding Gate

Active Photoelectric Protective Beam Sensors

What is a infrared photocell sensor? Photoelectric safety sensors for personnel safety.Together with the appropriatesafety control units, active photoelectric protective devices such as safety thru-beam sensors and safety light grids ensure that a stop is applied on detection of unauthorized access or if someone reaches into a danger zone.JUTAI IR-20M infrared photo beam sensors with 20m distance for slidng gate .

IR-20M Infrared Photocell Sensors with 20m distance for sliding gate has been widely used in the sliding door access control system. Infrared photo beam  is usually installed on both sides of the sliding door. One side is the transmitting end and the other side is the receiving end. When the infrared beam detects the person or the car passes by.will give a signal to the sliding door control system, the sliding door control system is better than the signal given by the infrared radiation, it will keep the door in a door open state, to ensure the safety of people or cars.It's best to place the Photocells as close to the gate as possible to reduce the chance of this happening.

How To Install IR-20M Infrared Photocell Sensors With 20m Distance For Sliding Gate

• Open the IR-20m,lift the front pannel of the Photocell;
• Insert the cable in their housing and fix the base to the Wall;
• If the photocell has to be mounted on a wall,drill the three 5Ø holes and fit suitable screw anchors;
• If the photocell has to be mounted on metal,Drill the three 3Ø holes for fitting with the self-tapping screws;
• Make the connections power photocells with a voltage can be 12VAC/DC or 24VAC/DC.
• If positioning,alignment and connection have been carried out properly, the red LED on the receiver will be off;
• Each Time the ray is interrupted, the Red LED switchs on .
• Cover the photocell with front pannel;
• Insert to the stop and close it ,interrupt the Ray several times,checking the relay response;
• Fix the front pannels with the provided screws.
• Open the IR-20m,lift the front pannel of the Photocell;
• Insert the cable in their housing and fix the base to the Wall;
• If the photocell has to be mounted on a wall,drill the three 5Ø holes and fit suitable screw anchors;
• If the photocell has to be mounted on metal,Drill the three 3Ø holes for fitting with the self-tapping screws;
• Make the connections power photocells with a voltage can be 12VAC/DC or 24VAC/DC.
• If positioning,alignment and connection have been carried out properly, the red LED on the receiver will be off;
• Each Time the ray is interrupted, the Red LED switchs on .
• Cover the photocell with front pannel;
• Insert to the stop and close it ,interrupt the Ray several times,checking the relay response;
• Fix the front pannels with the provided screws.

How To Install IR-20M Infrared Photo Beam Sensors With 20m Distance For Sliding GateTechnology Parameter

Installation DIagram IR-20M Infrared Photo Beam Sensors With 20m Distance For Sliding Gate

JUTAI's infrared photo beam installation is very simple, it is compatible with 12VAC / DC and 24VAC / DC voltage, no matter what voltage your door machine is, a product can be easily handled, reducing inventory pressure. In addition, Haotai's infrared radiation support one-on-one working state and one-to-many working state. If the case is one-to-one, we provide a jumper cap. Just insert the jumper cap according to our operating instructions. The location, and the operating current in AC mode, makes it easy to implement the functional mode you want.

Infrared Photo Beam Sensors Packaging & Shipping 

Packing details: Standard exported carton packing with foam protect. 
Delivery Details: 1-7 working days after payment
Payment Term: T/T, Western Union, PayPal

Order Reference to IR-20M Infrared Photocell Sensors

JUTAI  Service 
1. All items have 24 month quality guarantee.
2. Custom design shape and logo, for large amount, custom logo available for free.
3. Supported by professional engineers.
4. Special discount of our distributors or agents in their area.
5. Packing in standard export carton, suggest you pack it by wooden case to protect the products