Two Channels Vehicle Loop Detector For Hands Free Access Control Car Park Management

Two Channels Vehicle Loop Detector For Hands Free Parking Access Control System

When the Inductive dual channel loop detector work with the driveway boom barrier gate, Loop Detectors and Driveway Loops could help to avoid hitting a car and release gate close automatically; if work with the parking card dispenser machine, aim to release "one car, one card"  and read card;  Dual Channel Loop Detector can work with capture camera to capture vehicle picture,  the JUTAI new enhanced version of the double loop vehicle detector could detect the direction of vehicle and work with RFID long range card reader for trigger reading card or control the reading distance.

Two Channels Vehicle Loop Detector for Hands-Free Parking Access Control System Specification

Two Channels Vehicle Loop Detector Modes of operation

The LD-200 series detector may be configured for any one of the following modes:

• Presence Mode: AB Logic Presence Mode(Barrier Operation)         
• Pulse Mode: AB Logic Pulse Mode(Counting Logic)

Automatic Gate Opener Dual Channel Loop Detectors Switch Instruction

Dual Channel Loop Detector Application

• Parking Guidance System
• Car Locating System
• Parking Management system
• Traffic control applications
• Toll systems
• Vehicle counting
• Traffic Analysis

JUTAI vehicle loop detector not only can be used in parking, autogate, rolling shutter auto control solution, it also can be used in the traffic control system solution

Do you know why?

1.The inductive range is from 20uh-2000uf, nearly all types of different vehicle can be detector (bike, motorcycle, bus, car,truck,tailer,ect)

2.JUTAI Loop Detector is designed to accommodate numerous applications, can be adjusted intelligently to any environments and virtually eliminating false detection.

3.On the front panel, the four selectable loop frequencies (20~80KHz) can completely eliminate any crosstalk. If intermittence happen or failed loops get self restored, the detector will resume to normal operation without manually reset the detector.

4.Two separate output relays:  

Output A is presence output. Can be extended for 0, 2, 5, 8, 10, 15, 20 or 30 seconds, programmable with external DIP switches.  

Output B, programmable with external DIP switches, provides presence, pulse on entry, pulse on exit, or failed output. 8. By setting an external DIP switch, both outputs can be delayed for 2 seconds; this allows the detector to ignore vehicles passing over the loop faster than 5 miles per hour.

Two Channels Vehicle Loop Detector Ordering Information

LD-200  single channel, boxed, 1 type 11pin connects 100-240VAC(EU standard)

LD-202  single channel, boxed, 1 type 11pin connects 12-24VADC(EU standard)

LD-205  single channel, boxed, 2 type 11pin connects 100-240VAC(USA standard)

LD-206  single channel, boxed, 2 type 11pin connects 12-24VADC(USA standard)

More about JUTAI gate access products here