Induction Loop For Electric Gates Vehicle Parking Barrier

Induction Loop For Electric Gates Vehicle Parking Barrier

JUTAI series dual channel inductive loop detector work power is 110-240VAC/12-24VADC, It is primarily suited to complex multi-lane access control, directional logic entry, and exit, vehicle counting system, single way traffic light, vehicle parking barrier gate closing loop project applications. Jutai two channel multi-voltage vehicle loop coil detector manufacturer adopts advanced technology, Dual channel ground loop detector also can be used as two single loops or directional logic.

Induction Loop For Electric Gates Specifications

Dual channel loop detectors
Compatible with the parking management system 
Easy installation and operation
Factory price and fast shipping

Induction Loop For Electric Gates Introduction
Dual channel loop detectors are used  wherever vehicles have to detect.
For example for monitoring and safeguarding accessways or for counting vehicles.
The output signal can be used for controlling door and barrier gate drive mechanisms, operation barriers, 
controlling traffic light system or activating card dispensers in the parking management system. 
LD-106 connects one inductive loop (single channel)
LD-206 connects two inductive loops (double channel)

Induction Loop For Electric Gates Feature
High-temperature stability, used in kinds of environment
Environment drifting compensate automatically
With adjustable multi-level sensitivity
The user can choose working frequency according to a real need
With two relay output
Small size takes up little space

Switch Instruction

1. Sensitivity and frequency of the loop can be adjusted by 7-way dip switch and 10-way Dip switch setting.
2. User can select 8 different setting by changing the setting of the dip-switch to different modes as in the Dip-switch setting tables below.Dip switch 6,7 and 8 for CH1 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.
3. Dip switch 3,4 and 5 for CH2 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.

Specifications

• Self-turning range : 20-2000μH
• Sensitivity :8 way selectable / Highest 0.015% DL/L  /  Lowest 0.8% DL/L   
• Frequency :Four step switch selectable 20-80KHz
• Power Requirements : 110-240VAC (48 to 62Hz) / 12-24VADC(48 to 62Hz)
• Operation Temp : -40℃ to +70℃ / (-111℉ to +158℉)
• Fault Output Blinks slowly: It maybe because the loop is short circuit or the no:of turns is not enough Blinks faster: It maybe because the loop is open or the no: of turns is too many.
• Response Times : 10-90MS
• Visual Indications Power LED-Red /Channel LED-Green
• Reset : Reset by push button on front of enclosure
• Relay Output: Presence Relay/Fault Relay
• Humidity : Up to 95% relative humidity without condensation
• Circuit Protection Conformal coating over the PCB and all components
• Loop wire: more than 10meters requires the use of a 2 core shield cable,do not exceed 30 meters distance between control box and loop
• Size:75mm*43mm*110mm

JUTAI Induction Loop For Electric Gates used for industrial doors and gates, barrier gate, rolling shutter and garage door.

Why you choose us Induction Loop For Electric Gates?

1. Stable products. ( 2 years warranty)

2. OEM Brand, Logo, Label available

3.24*7d at your service to give you best support

4. Detailed installation manual and writing diagram to make everything be easy,video to show you how to use our loop detector if necessary.

5. Fast finishing time for you to become more competitive at your local market. 1-3 days for a small order.

6. Standard:GB2003-14887,CE

7. Well-packed with K Carton +EPE

8. Delivery on time&Support shipping via UPS/DHL/FedEx/EMS/Sea &air,etc.