Gate Access Barrier Gate Operator JUTAI Support Parking Barrier Gate Solution

Security Barrier Gate Access  for Toll Gate System

Barrier Gate Access  operator ins tallation is our life everywhere, such a department, school, parking lot, supermarket, toll gate. Choose JUTAI barrier gate manufacturer for the best security barrier gate operator for toll gate system. More stable working and no noise when working at parking management system or toll gate system. more than 10.0000million opening and closing time long working life.

Specifications

Gate Access Features

1. Mould production with accurate grinding and heat treatment of worm and main rod, which is high accuracy, low comsumption and less noises. 

2. Arm Reverse Function: Arm will be automatically reverse when it hits obstacles when closing.

3. Arm Swing Out Function: Arm will be swing out when vehicle hits the arm which can avoid further damage to the vehicle.

4. Cooling Fan Device: It will be automatically opened when the motor works in heavy duty and high temperature.

5. Manual Release Cluntch: When loss of power, it can manually open and close the barrier.

6. Sturdy Housing: 2mm thickness cold roll plate or galvanized plate with expoxy paiting, which can be heavy duty.

7. Anti-freezen oil can make our barrier gate working in -45 degree.

8. Spring sleeve can protect the accessories inside the machine case from damaging by spring broken.

9. Module production with all accessories, can be replced easily, and save cost.

10. Pressure spring can avoid damage casued by tention spring, which is more safety.

Optional Accessories

1. Loop detector: single loop detector or dual channel loop detector

2. Infrared Photocell  sensor

3.Barrier gate operator and controller board

4.Traffic LED light 

5. RFID reader

What can we do for our customer?

Gate Access Service for free:
1. One year free service is supplied(not including the arm)

2. Lifetime charged service is supplied

3. Technical service is supplied

4. OEM: we can customized machine case, color, logo for you, which accroding to your detailed requirements.

5. Technical support and aftersales service, it is a long term relatioship between us.

6. Price can be negotiable when you have big order quantity.

Service for charging:

1. Broken by wrong installation

2. Broken by improper voltage

3. The surfaces of the barrier destroyed by wrong installation and usage

4. Overdue service items are out of our promise.

Common Malfunctions and Solutions

1 The arm is no reaction when connect the power and press the open/close key.

a: Check the controller’s power supply and fuse.

b. There is no battery or power shortage on the remote control, the distance is too far.

c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.

d. The external protection circuit has failed or in a protected state,check the infrared device or loop detector device.

e: Check the motor and capacitor to see if invalid.

2 The boom could not raise up or fall down when press the open/close key.

a: The photoelectric limit is on bad contact,check the connections.

b: Replace the photoelectric limit switch.

3 The motor is buzz,boom is no reaction when press the open/close key.

a:The voltage is insufficient,check the 220V power supply.

b:The gears are stuck, and hand wheel rotates several circles toward the loose place, and re-adjust the photoelectric limit to prevent the struck caused by mechanical limit from being before the photoelectric limit.

c: It’s imbalance between the balance spring and boom,re-adjust it.

4 The boom Gate Access is not horizontal and vertical.

a: The photoelectric limit is shaft,re-adjust and fix.

b: Check the connection rod and adjust the boom to horizontal and vertical,and make the photoelectric limit acts before the mechanical limit.

5 The force for arm up become smaller,sometimes need the handle assistance to make it up.

a: Check the motor and capacitor.

b: Re-adjust the spring balance.