Photocell Safety Beam Used As Safety Devices For Electric Gates

Photocell Safety Beam Sensor for Garage Door 

JUTAI infrared photocell sensor safety beam is main used for electoric gate and this photocell main to stop gates from closing onto vehicles and pedestrians. When we use it as a safety device for automatic gate or rolling system,it will detect the car or people and give a safe signal to controller for gate and people safe purpose.JUTAI Main manufacture all series high quality photo beam sensor ,and JUTAI photo beam sensor with 20m stable reading distance,and with very mini size. Photo cell sensor manufactured by JUTAI, quality not lose any italy brand.

Infrared Photocell Sensor Safety Beam Used As  Safety Devices For Electric Gates Advantage

• For use as a safety devices for electric gates system, rolling shutter system, garage door system, to stop gates from closing onto vehicles and pedestrians when approaching or passing through the gate area.

• Flat, self-aligning photocell receiver-transmitter set, external installation, range up to 20m power supply with 12vac/dc and 24Vac/dc

• Available for both horizontal and vertical fitting.

Infrared Photocell Sensor Safety Beam Used As Safety Devices For Electric Gates  Parameter

Details Size Of Photocell Safety Beam Used As Safety Devices For Electric Gates

JUTAI Photocell Safety Beam Used As Safety Devices For Electric Gates with very Mini Sizie, you can refer to the following photo;All of JUTAI Photocell Safety Beam Cover adopts Germany material, and infrared lighting we use american brand, relay we use japan brand, so we can make sure all of jutai photocell saftey beam with a very good quality.

What Service JUTAI Offer To 

JUTAI is a very professional manufacturer of infrared Photocell. All of our safety photo beam cover are made of German anti-UV material and infrared lighting from American brands, relays We use Japan Omron, coupled with the strict quality control, we ensure that each product has a stable and reliable quality, and the single-beam infrared detector is mainly applied to the gate control system. Automatic doors, garage doors and rolling shutter access control systems. At present, the products have been exported to Europe and America, and JUTAI provide OEM and ODM services to many customers.

Install Size For Photocell Safety Beam Used As Safety Devices For Electric Gates

How to install JUTAI photocell Saftey Beam? We recommend that the transmitter and receiver be fixed on different columns respectively, the distance from the ground is about 0.7-1.2 meters, and the transmitting end and the receiving end must be on the same horizontal line to ensure that the infrared transmitter and the infrared receiver can communicate.